Shijiazhuang Chengke Environmental Protection Equipment Manufacturing Co., Ltd.

Hair aggregator
Suitable for pretreatment of various types of water. This equipment can remove larger
impurities in the water, such as hair, paper, weeds, plastic bags, plastic sheets, etc. The installation and use of this equipment can effectively prevent the clogging of the water pump and subsequent equipment and ensure the normal operation of the entire system.
Products can be divided into bolt-type and quick-opening methods.
The bolt-type opening method has a compact structure and good sealing performance. The quick-opening method is convenient to open and use. It saves money. Artificial
Creates better conditions.
Working principle
Hair aggregator
When working,
the medium enters the inside of the filter from the inlet,
passes through the filter and then enters the outside of the filter

Enter the piping system through the outlet.
When the resistance of the hair collector
increases due to the blockage of dirt
after being used for a certain period of time,
then it is necessary to open the cover of the collector,
Take out the
filter cartridge inside and clean it before continuing to use it.
Product technical parameters
Design pressure
Design temperature ℃
Filter pore size
Applicable medium non-corrosive water or neutral liquid
Installation requirements
Hair collectors should be installed horizontally.
Internal debris should be removed from the piping system before connecting it to the equipment.
After the hair collector is connected to the pipeline, a hydraulic pressure test should be carried out. The test pressure should be
times the design pressure. When the working pressure of the piping system is lower than the design pressure of the hair collector,
the test can also be performed at times of the working pressure. The hydraulic pressure test should use clean water at room temperature and the test time is minutes. All seals and welds must be free of leakage.
It is best to set up a bypass during installation to avoid affecting the system operation during maintenance.
Before operating and maintaining the pipeline system, the system should first be filled with normal temperature water and flushed repeatedly to thoroughly remove debris in the pipeline
to prevent clogging of the collector.
The hair collector should work under the specified temperature and pressure, and should not work at over temperature or pressure.
During the debugging and operation stages, the inlet valve should be opened slowly, and violent operation is strictly prohibited to avoid
the medium from violently impacting the filter screen and damaging the equipment.
The hair collector should be disassembled, inspected and maintained regularly. When the pressure difference between the inlet and outlet exceeds the requirements
it should be cleaned or inspected in time.
When the filter of the hair collector is damaged after long-term use, it should be replaced in time.
Purpose The hair collector is an essential equipment for the circulating water treatment system. The turbid water in the swimming pool
mixed with a large amount of sediment, stones, debris, hair, etc. is pumped out by the water pump. First, it passes through the hair. The interception and collection of the concentrator, and its filtration and throttling effects not only threaten the life of the water pump, but also have a great impact on the quality of the filtered water of the water purifier.
The hair filter is an essential pre-treatment device in swimming pool circulating water treatment. It mainly removes fibers,
hair and larger solid debris in the pool,
so that your The circulating pump can work with confidence