Product features: Compact structure and small size, easy for on-site layout and installation. The sight glass on the tank can visually check the consumption of silicon phosphorus crystal. The inlet and outlet structures are upper and lower split mesh plates. The material and structural limits increase the flow area of the water and effectively reduce the water resistance generated by the silicon-phosphorus crystal spheres to ensure reliable operation without jamming, clogging, or clogging.
The tank body is made of stainless steel or carbon steel plate and is integrally stamped and processed with double-sided welding technology for overall anti-corrosion treatment. The tank can withstand -kg pressure without deformation, damage or corrosion.
. The sewage discharge solenoid valve is automatically activated at a scheduled time by the sewage discharge controller for sewage flushing. It has a strong sewage cleaning effect and consumes less water for sewage discharge. It prevents the concentration of silicon phosphorus crystals brought into the water from exceeding the standard when the water is not used for a long time and the water temperature is high.
Tank structure: The silicon-phosphorus crystal tank is divided into manual part and electric part. The structure consists of: water inlet and outlet, bracket shell, mesh core system, sight glass, sewage outlet, electrical control, etc.
Working principle: Manual working process: After the silicon phosphorus crystal tank is connected to the pipeline system, water enters the tank from the lower water inlet. After passing through the gap of the silicon phosphorus crystal sphere, the water flows out from the water outlet. When the silicon phosphorus crystal in the tank passes through the mesh core When the volume is larger than the mesh core hole, it is trapped in the mesh core. The medicine in the tank generates Brownian motion through the impact of water flow. At this time, the medicine can exert its normal pharmacological effects when it is slowly dissolved in water. When used for a certain period of time, the broken silicon-phosphorus crystal particles produced by the impact of water flow will cause a certain pressure difference between the water inlet and the water outlet. When the set value is reached (the pressure difference is generally different for different filter diameters and precisions), the sewage discharge solenoid valve is put into operation. The water flow reversely flushes the impurities and dirt attached to the inner wall of the mesh core, and the attachments are discharged from the filter. Wait for the pressure difference between the inside and outside. When it returns to normal, close the drain valve to complete the filtering and draining process.
Instructions for use: Close the water inlet and outlet valves, open the tank dosing port, and pour in the silicon phosphorus crystal. The amount added is % of the total tank capacity. Open the water inlet valve and open the drain valve at the bottom of the tank to discharge the oxide layer particles generated during the preservation of the silicon phosphorus crystal through the drain outlet. Close the sewage discharge and open the water outlet valve to put it into normal use.
Fourth: Installation steps and requirements for silicon-phosphorus crystal tanks:
First, check whether the appearance of the equipment is damaged and then install it if there is no abnormality.
The equipment should be installed on the prepared concrete foundation platform. The equipment does not need to be fixed to the concrete foundation platform.
The equipment installation form should be bypass installation to meet the need for adding silicon phosphorus crystal agents without stopping the machine.
The distance between the outer diameter of the equipment body and the wall should not be less than the distance between equipment.
, equipment maintenance distance is not less than.
. The pipes at the inlet and outlet of the equipment should be equipped with a pipe bracket near the pipe mouth. A bracket should be installed under the valve that is greater than or equal to D and is directly connected to the container pipe mouth.
The water inlet, outlet and bypass pipe of the equipment need to be equipped with valves.
, -,,, type equipment and pipes are connected with threads - type, -,,, equipment and pipes are connected with flanges.
100kg Chengke silicon phosphorus crystal tank Wuhan factory direct sales